Skip to Content
Will's Workbench Model Railways
Home
About us
Ranges
Shop
Blog
Contact us
Login Account
0
0
Will's Workbench Model Railways
Home
About us
Ranges
Shop
Blog
Contact us
Login Account
0
0
Home
About us
Ranges
Shop
Blog
Contact us
Login Account
Shop SUSPENSION UNIT 4MM – BR W-IRON FOR BACHMANN WAGONS CC02S-11
unnamed-37.png Image 1 of 2
unnamed-37.png
unnamed-59.jpg Image 2 of 2
unnamed-59.jpg
unnamed-37.png
unnamed-59.jpg

SUSPENSION UNIT 4MM – BR W-IRON FOR BACHMANN WAGONS CC02S-11

£12.99

This BR Suspension Unit kit comes complete with etched brass sheet, pin point wheel bearings and spring wire components for the conversion of one wagon. It provides an accurate model of a typical W-Iron including the visible brake calliper arm and mounting.

12 mm diameter wheels with disc brakes inserts for each wheel, along with the the required combined spring and axle box from the Stenson Models range are needed to complete.

The spring wire supplied of 0.011″/0.28mm is suitable for the Bachmann VBA wagons.

Please download the instructions from the link below

CC02S Revised Sprung W irons and Springs for Bachmann BR air braked wagons.docx

Disc brake inserts are available from the Stenson Models range

Quantity:
Add To Cart

This BR Suspension Unit kit comes complete with etched brass sheet, pin point wheel bearings and spring wire components for the conversion of one wagon. It provides an accurate model of a typical W-Iron including the visible brake calliper arm and mounting.

12 mm diameter wheels with disc brakes inserts for each wheel, along with the the required combined spring and axle box from the Stenson Models range are needed to complete.

The spring wire supplied of 0.011″/0.28mm is suitable for the Bachmann VBA wagons.

Please download the instructions from the link below

CC02S Revised Sprung W irons and Springs for Bachmann BR air braked wagons.docx

Disc brake inserts are available from the Stenson Models range

This BR Suspension Unit kit comes complete with etched brass sheet, pin point wheel bearings and spring wire components for the conversion of one wagon. It provides an accurate model of a typical W-Iron including the visible brake calliper arm and mounting.

12 mm diameter wheels with disc brakes inserts for each wheel, along with the the required combined spring and axle box from the Stenson Models range are needed to complete.

The spring wire supplied of 0.011″/0.28mm is suitable for the Bachmann VBA wagons.

Please download the instructions from the link below

CC02S Revised Sprung W irons and Springs for Bachmann BR air braked wagons.docx

Disc brake inserts are available from the Stenson Models range

Related products

CC07S Fig 7.JPG CC07S Fig 7.JPG CC07S Fig 7.JPG
Internal sprung internal suspension unit for Bachmann HEA et Al (P4 only) - CC07S
£12.99
P1080567s.JPG P1080567s.JPG P1080567s.JPG
Internal Pedestal Suspension (P4 only) - CC05S ESC - ESC suspension
£15.99
P1080567s.JPG P1080567s.JPG P1080567s.JPG
Internal Pedestal Suspension (P4 only) - CC05S-GS Gloucester Suspension
£15.99
sold out
CC06S Fig6I.JPG CC06S Fig6I.JPG CC06S Fig6I.JPG
Internal shoe braked suspension (P4 only) - CC06S
£14.99
unnamed-40.png unnamed-40.png
SUSPENSION UNIT 4MM – INTERNAL FRAME FOR BACHMANN TTA WAGONS CC03S – NOTE P4 GAUGE ONLY
£12.99